Universal Gear

Gear Coupling

The advantages of using Geared Coupling on all directly connected machinery is now recognized and appreciated by engineers and operating men. Gear couplings are intended to compensate for the usual and unavoidable errors in alignment and should allow free lateral flowto the connected shafts. Even when favourable conditions permit perfect alignment to the two Shafts, there is no assurance they will remain so, the vibrations, the sinking of foundation, wear of bearings and inaccuracies in machining are all common enemies to the safe and efficient operation of connected machinery.

Alignment

Misalignment of machines connected by rigid couplings not only causes excessive wear of couplings and machine parts but also increase power consumption. When two out of line shafts are connected rigidly, severe bending stresses are set up in each shaft. For each revolution, the shaft passes through a complete cycle of tension and compression stresses and would be likely to fatigue the shaft material and considerable heat and damage the whole mechanism.

Universal Gear Couplings are designed to handle the misalignments of connected shafts. These couplings in an assembled condition are ready to take misalignment (see fig, 1,2 & 3)

When transmitting torque you need a perfect selection and correct type of coupling to achieve the maximum optimum efficiency and dependability. Our designed gear couplings with Triple Crowned barrel shaped tooth coupling are the solution the your problems. Built to last longer, protect your equipment and save your money, Universal Gear Couplings are right for a whole world of applications.

Curved Tooth Gear Coupling

ugi

Size	HP per 100 rpm	Torque max Kgm	Speed max rpm	Bores mm			A	C	D	F	H	J	M	GAP	Weight
Size	HP per 100 rpm	Torque max Kgm	Speed max rpm	Flex hub Max	Min	Pilot	A	C	D	F	H	J	M	GAP	Weight
1001	14.5	105	6300	45	20	15	170	55	65	110	17	49	65	5	10
1002	31.5	225	5000	60	30	20	185	70	85	125	17	62	80	5	15
1003	67	485	4000	75	40	20	220	85	105	150	20	78	105	5	26
1004	121	870	3350	90	45	25	250	105	130	175	20	96	125	5	40
1005	167	1200	2800	110	50	25	290	110	155	200	25	106	140	10	63
1006	258	1850	2500	125	65	25	320	125	175	230	25	125	150	10	86
1007	419	3000	2120	140	80	25	350	140	200	265	25	140	170	10	122
1008	524	3750	1900	160	95	25	390	160	235	300	28	152	190	10	160
1009	628	4500	1700	180	105	25	445	165	260	355	30	164	205	10	200
1010	1075	7700	1400	220	120	100	490	180	300	405	30	176	220	10	300
1011	1535	11000	1250	260	130	100	545	200	340	460	30	196	235	10	475
1012	2430	17400	1120	300	140	120	600	240	380	500	35	225	275	10	640
1013	3255	23300	1000	330	180	160	680	260	440	560	35	250	300	15	885
1014	4455	31900	900	355	230	210	730	280	480	610	35	270	320	15	1110